Operation Manual

User Manual of Digital Video Recorder
65
Two limit points can be set for the view of the PTZ camera, and then the PTZ camera can horizontally auto scan
between the two predefined limits.
This function requires the support of the connected PTZ camera.
Steps:
1. Select the camera for PTZ setting from the drop-down list.
2. Use the directional and zoom / focus / iris buttons on the PTZ control panel to steer the camera to the desired
view, and click the button Left Limit / Right Limit to set the left / right limit point.
4.2.8 Calling Linear Scan
Purpose:
The PTZ camera will horizontally auto scan between the two predefined limit points.
Steps:
1. Click the button in the lower-right corner of the PTZ setting interface;
or press the PTZ button on the front panel;
or click the PTZ Control icon in the quick setting toolbar during the live view process;
or click PTZ Control on the right-click menu to open the PTZ control panel in live view mode.
2. Select the PTZ camera from the drop-down list for control.
3. Click the icon on the panel and then click the One-touch tab to enter the One-touch control interface.
4. Click the Linear Scan button to start the linear scan.
5. To stop the linear scan, you can click the Linear Scan button again on the panel.
6. You can click the Restore button and then reboot the PTZ camera to clear the limit points information.
Figure 4. 8 Control Panel-Call Linear Scan
4.2.9 One-touch Park
Purpose:
The one-touch park function allows the PTZ camera to start a predefined action (park action: scan, preset, pattern,
etc.) automatically after a period of inactivity (park time).