Operation Manual

User Manual of Digital Video Recorder

3.2.2 Using the Mouse in Live View

Figure 3. 1 Right-click Menu

Table 3. 5 Mouse Operation in Live View

Name

Description

Common Menu

Quick access to the sub-menus which you frequently visit.

Enter the main menu of the system by right clicking the mouse.

Single Screen

Switch to the single full screen by choosing channel number from the drop-down list.

Multi-screen

Adjust the screen layout by choosing from the drop-down list.

Previous Screen

Switch to the previous screen.

Next Screen

Switch to the next screen.

Start/Stop Auto-switch

Enable/disable the auto-switch of the screens.

Start Recording

Start all-day normal recording or motion detection recording for all channels.

Add IP Camera

Add IP camera to the device.

Playback

Play back the video of the selected channel.

PTZ Control

Enter the PTZ control panel in live view mode.

Output Mode

Set the video output mode to Standard, Bright, Gentle or Vivid.

Aux Monitor

Switch to the auxiliary output mode.

 The dwell time of the live view configuration must be set before using Start Auto-switch. Refer to Chapter

3.3 for dwell time settings.

 If you enter Aux monitor mode and the Aux monitor is not connected, the mouse operation is disabled; you

need to switch back to the Main output with the MAIN/AUX button and Enter button on the front panel or

remote.

 Add IP Camera is only available for the HDVR series.