Operation Manual

User Manual of Digital Video Recorder
178
3. Click the Save button to save the setting.
4. You can open the Command Prompt window in your PC, and input “telnet IP Address” to connect with the
DVR, as shown in the figure below.
Example:
The IP address of the DVR is 192.0.0.64, you can input “telnet 192.0.0.64” and then press Enter to connect
to the DVR.
Figure 11. 31 Connect to DVR
The telnet function turns invalid after the device shutting down or rebooting, and you need to enable it again if
required.