Operation Manual

User Manual of Digital Video Recorder
177
Figure 11. 28 Advanced Settings Interface
2. Check the checkbox of the Enable Virtual Host.
3. Click the Save button to save the setting.
4. Enter the IP camera management interface of HDVR. The Connect column appears on the right-most side of
the camera list.
Configuration > System > Camera Management > IP Camera
Figure 11. 29 Accessing IP Camera
5. Click the link to go the management page of the selected IP camera.
11.2.11 Telnet Settings
Purpose:
Telnet function provides an easy way to get access to the DVR/HDVR. You can see the advanced information
about the device by inputting command; as well the configuration can also be realized through telnet connection.
Steps:
1. Enter the Advanced settings interface.
Configuration > System > Security
Figure 11. 30 Advanced Settings Interface
2. Check the checkbox of the Enable Telnet.