User Manual

ManualsBrandsHikvision ManualsNVR16 Channel Embedded Plug & Play Network Video Recorder, 32TB

Table Of Contents

Introduction
- 1.1 Front Panel
- 1.2 IR Remote Control Operations
  - 1.2.1 Pairing (Enabling) the IR Remote to a Specific Device (optional)
  - 1.2.2 Unpairing (Disabling) an IR Remote from a Device
- 1.3 USB Mouse Operation
- 1.4 Rear Panel
Chapter 2 Getting Started
- 2.1 Start up the Device
- 2.2 Activate the Device
- 2.3 Configure Login Unlock Pattern
- 2.4 Login to the Device
  - 2.4.1 Log in via Unlock Pattern
  - 2.4.2 Log in via a Password
- 2.5 Start Setup Wizard
- 2.6 Enter Main Menu
- 2.7 System Operation
Chapter 3 Camera Management
- 3.1 Add IP Cameras
  - 3.1.1 Add IP Cameras Manually
  - 3.1.2 Add the Automatically Searched Online IP Cameras
- 3.2 Manage Cameras for PoE Device
- 3.3 Enable the H.265 Stream Access
- 3.4 Upgrade the IP Camera
- 3.5 Configure the Customized Protocols
Chapter 4 Camera Settings
- 4.1 Configure OSD Settings
- 4.2 Configure Privacy Mask
- 4.3 Configure the Image Parameters
- 4.4 Configure the Day/Night Switch
- 4.5 Configure IP Camera Time Sync
- 4.6 Configure Other Camera Parameters
Chapter 5 Live View
- 5.1 Start Live View
- 5.2 Target Detection
- 5.3 Configure Live View Settings
- 5.4 Configure Live View Layout
  - 5.4.1 Configure Custom Live View Layout
  - 5.4.2 Configure Live View Mode
- 5.5 Configure Camera Auto-Switch
- 5.6 Configure Channel-Zero Encoding
Chapter 6 PTZ Control
- 6.1 PTZ Control Wizard
- 6.2 ConfigurePTZ Parameters
- 6.3 Set PTZ Presets, Patrols, and Patterns
- 6.4 Auxiliary Functions
Chapter 7 Storage
- 7.1 Storage Device Management
- 7.2 Storage Mode
  - 7.2.1 Configure HDD Groups
  - 7.2.2 Configure HDD Quota
- 7.3 Recording Parameters
- 7.4 Configure Recording Schedule
- 7.5 Configure Continuous Recording
- 7.6 Configure Motion Detection Triggered Recording
- 7.7 Configure Event Triggered Recording
- 7.8 Configure Alarm Triggered Recording
- 7.9 Configure POS Event Triggered Recording
- 7.10 Configure Picture Capture
- 7.11 Configure Holiday Recording and Capture
- 7.12 Configure Redundant Recording and Capture
Chapter 8 Disk Array (RAID)
- 8.1 Create a Disk Array
- 8.2 Rebuild an Array
- 8.3 Delete an Array
- 8.4 Check and Edit Firmware
Chapter 9 File Management
- 9.1 Search and Export All Files
  - 9.1.1 Search Files
  - 9.1.2 Export Files
- 9.2 Search and Export Human Files
  - 9.2.1 Search Human Files
  - 9.2.2 Export Human Files
- 9.3 Search and Export Vehicle Files
  - 9.3.1 Search Vehicle Files
  - 9.3.2 Export Vehicle Files
- 9.4 Search History Operation
  - 9.4.1 Save Search Conditions
  - 9.4.2 Call Search History
Chapter 10 Playback
- 10.1 Play Video Files
- 10.2 Playback Operations
Chapter 11 Event and Alarm Settings
- 11.1 Configure Arming Schedule
- 11.2 Configure Alarm Linkage Actions
- 11.3 Configure Motion Detection Alarms
- 11.4 Configure Video Loss Alarms
- 11.5 Configure Video Tampering Alarms
- 11.6 Configure Sensor Alarms
- 11.7 Configure Exceptions Alarms
- 11.8 Setting Alarm Linkage Actions
- 11.9 Trigger or Clear Alarm Output Manually
Chapter 12 VCA Event Alarm
- 12.1 Face Detection
- 12.2 Vehicle Detection
- 12.3 Line Crossing Detection
- 12.4 Intrusion Detection
- 12.5 Region Entrance Detection
- 12.6 Region Exiting Detection
- 12.7 Unattended Baggage Detection
- 12.8 Object Removal Detection
- 12.9 Audio Exception Detection
- 12.10 Sudden Scene Change Detection
- 12.11 Defocus Detection
- 12.12 PIR Alarm
- 12.13 Thermal Camera Detection
- 12.14 Queue Management
Chapter 13 Smart Analysis
- 13.1 People Counting
- 13.2 Heat Map
Chapter 14 POS Configuration
- 14.1 Configure POS Settings
  - 14.1.1 Configure POS Connection
  - 14.1.2 Configure POS Text Overlay
- 14.2 Configure POS Alarm
Chapter 15 Network Settings
- 15.1 Configure TCP/IP Settings
  - 15.1.1 Device with Dual Network Interface
  - 15.1.2 Device with a Single Network Interface
- 15.2 Configure Hik-Connect
- 15.3 Configure DDNS
- 15.4 Configure PPPoE
- 15.5 Configure NTP
- 15.6 Configure SNMP
- 15.7 Configure Email
- 15.8 Configuring NAT
- 15.9 Configure Ports
Chapter 16 Hot Spare Device Backup
- 16.2 Set Hot Spare Device
- 16.3 Set Working Device
- 16.4 Manage Hot Spare System
Chapter 17 User Management and Security
- 17.1 Manage User Accounts
- 17.2 Manage User Permissions
- 17.3 Configure Password Security
- 17.4 Reset Password
Chapter 18 System Service Maintenance
- 18.1 Storage Device Maintenance
- 18.2 Search and Export Log Files
  - 18.2.1 Search the Log Files
  - 18.2.2 Export the Log Files
- 18.3 Import/Export IP Camera Configuration Files
- 18.4 Import/Export Device Configuration Files
- 18.5 Configure System Services
- 18.6 Upgrade the System
- 18.7 Restore Default Settings
Chapter 19 General System Settings
- 19.1 Configure General Settings
- 19.2 Configure Date & Time
- 19.3 Configure DST Settings
Chapter 20 Appendix
- 20.1 Glossary
- 20.2 Troubleshooting
- 20.3 List of IP Cameras Connected to PoE by Long Network Cable (100 - 300 m)

Network Video Recorder User Manual

The PTZ control panel displays on the right of the interface.

Use the directional buttons on the PTZ control panel to wheel the camera to the location where

you want to set a preset, and the zoom and focus operations can be recorded in the preset as well.

Click in the lower right corner of Live View to set the preset.

Set Preset

Select the preset No. (1 to 255) from the drop-down list.

Enter the preset name in the text field.

Click Apply to save the preset.

Repeat steps 2-6 to save more presets.

(Optional) Click Cancel to cancel the location information of the preset.

(Optional) Click in the lower right corner of Live View to view the configured presets.

View the Configured Presets

Call Presets

Purpose

A presets enables the camera to point to a specified position such as a window when an event

takes place.

Click on the quick settings toolbar of the PTZ camera Live View.

Click in the lower right corner of Live View.

Select the preset No. from the drop-down list.

Click Call to call it, or click in the lower right corner of Live View, and click the configured

preset to call it.

Call Preset (1)