Manual
Table Of Contents
- Chapter 1 Startup
- Chapter 2 Live View
- Chapter 3 Playback
- Chapter 4 Search File
- Chapter 5 Configuration (Easy Mode)
- Chapter 6 Configuration (Expert Mode)
- 6.1 System Configuration
- 6.2 Network Configuration
- 6.3 Camera Management
- 6.3.1 Network Camera
- Add Automatically Searched Online Network Camera
- Add Network Camera Manually
- Edit Network Camera
- Upgrade Network Camera
- Configure Advanced Camera Parameters
- Add Network Camera Through PoE
- Configure Channel Type
- Sort Channel Order
- Configure Remote Settings
- Import/Export IP Camera Configuration File
- Advanced Settings
- 6.3.2 Display Settings
- 6.3.3 Privacy Mask
- 6.3.1 Network Camera
- 6.4 Event Configuration
- 6.5 Recording Management
- Chapter 7 Maintenance
- Chapter 8 Alarm
- Chapter 9 Web Operation
- Chapter 10 Appendix
Network Video Recorder User Manual
72
Figure 6-27 Quota
Note
When the quota capacity is set to 0, all cameras will use the total capacity of HDD for videos and
pictures.
5. Click Apply.
6. Restart the video recorder to activate the new settings.
6.5.5 Advanced Settings
Steps
1. Go to Configuration → Record → Advanced.
2. Configure the parameters as your desire.
Overwrite
● Disable: When the HDD is full, video recorder will stop writing.
● Enable: When hard drive is full, video record will continue to write new files by deleting the
oldest files.
Enable HDD Sleeping
HDDs which are free of working for a long time will turn into sleep status.
Save Camera VCA Data
Camera VCA data will be saved so that you can search it.
Alarm Storage
When the HDD free space is not enough, you can disable it to save space, but your device will
stop storing alarm information.
Picture Storage
When the HDD free space is not enough, you can disable it to save space, but your device will
stop storing pictures.