Manual
Table Of Contents
- Chapter 1 Startup
- Chapter 2 Live View
- Chapter 3 Playback
- Chapter 4 Search File
- Chapter 5 Configuration (Easy Mode)
- Chapter 6 Configuration (Expert Mode)
- 6.1 System Configuration
- 6.2 Network Configuration
- 6.3 Camera Management
- 6.3.1 Network Camera
- Add Automatically Searched Online Network Camera
- Add Network Camera Manually
- Edit Network Camera
- Upgrade Network Camera
- Configure Advanced Camera Parameters
- Add Network Camera Through PoE
- Configure Channel Type
- Sort Channel Order
- Configure Remote Settings
- Import/Export IP Camera Configuration File
- Advanced Settings
- 6.3.2 Display Settings
- 6.3.3 Privacy Mask
- 6.3.1 Network Camera
- 6.4 Event Configuration
- 6.5 Recording Management
- Chapter 7 Maintenance
- Chapter 8 Alarm
- Chapter 9 Web Operation
- Chapter 10 Appendix
Network Video Recorder User Manual
45
Figure 6-8 ISUP
3. Turn on Enable.
Note
Enabling ISUP will disable other platform access.
4. Set the related parameters.
Server Address
The platform server IP address.
Server Port
The platform server port, ranges from 1024 to 65535. The actual port shall be provided by the
platform.
Device ID
The Device ID shall be provided by the platform.
Version
ISUP protocol version, only V5.0 is available.
Encryption Password
Encryption password is required when using ISUP V5.0 version, it provides more secure
communication between the device and platform. Enter it for verification after the device is
registered to the ISUP platform.
5. Click Apply to save the settings and restart the device.