User's Manual

Network Video Recorder User Manual
170
Figure 18-15 Add User
Step 4 Edit the user name, and enter the strong password.
Step 5 Select the user level to Media User, Operator and Admin.
Step 6 Click OK to save the settings.
Result:
The added user accounts have the permission to connect other devices to the device via ONVIF
protocol.
ONVIF protocol is disabled by default.
18.7.3 Manage IP Camera Activation
When you activate the device for the first-time access, you can set the activation password for the
IP camera(s) as well. And you can also manage the password to enhance the security.
Step 1 Go to System > System Service > IP Camera Activation.
Step 2 Check the Change Password to enable the permission.
Step 3 Enter the admin password of the device to obtain the permission.