Configuration Guide

6 iDS-9632NXI-I8/4F

Stranger Mode

Notes:

1) When the selected mode is Face Picture Comparison, the ‘Upload to monitoring center when

comparison failed ‘can be ticked to upload the capture face to surveillance center as well

when the similarity between capture face and face in library is lower than the Similarity you

set.

2) Enable Alarm Output Pulse: The time of alarm output pulse can be configured to control the

alarm device (like access control device) better.

2.4 Configure high frequency people detection

Go to NVR’s web page, Configuration—Event—Frequency of people, tick Enable and select

channels. If someone came to your private property several times during a period of time, this guy

may want to do some bad thing, then the frequently appeared person alarm will be very useful.

But for commercial place, the staff should not trigger the alarm, then we can create a face library

of staff and select this library as Linked Face Picture Library as shown below so that all the people

in this library won’t trigger this alarm. The high frequency people detection will occupy the

resource of real-time face comparison, which means iDS-9632NXI-I8/4F can support 4-ch high

frequency people detection.