Quick Start Guide

Network Video Recorder Quick Start Guide
20
Step 2 Unlock the front panel with the attached key, and press the buttons on both sides of the
front panel to open it.
Figure 2-2 Open Front Panel
Step 3 Insert the HDD until it is fixed firmly.
Figure 2-3 Insert HDD
Step 4 (Optional) Repeat the steps above to install other HDDs.
Step 5 Close the front panel and lock it with key.
2.2.2 Fix-on-Bottom Installation
Fix-on-bottom installation is applicable when you need to install and fix the HDD on the device
bottom.
Step 1 Remove the cover from device by unfastening the screws on panels.
Figure 2-4 Remove Cover
Step 2 Connect the data cable and power cable.