User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 88
Before You Start
At least one available physical disk must exist to rebuild an array.
Step 1 Go to Storage > RAID Setup > Array.
Figure 9-7 Array List
Step 2 Click of the degraded array.
Figure 9-8 Rebuild Array
Step 3 Select the available physical disk.
Step 4 Click OK.
Step 5 Click OK on the pop up message box “Do not unplug the physical disk when it is
under rebuilding.”
9.3 Deleting an Array
Deleting an array will delete all data saved to it.
Step 1 Go to Storage > RAID Setup > Array.