User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 82
Figure 8-13 Edit Holiday Settings
1) Edit the holiday name.
2) Set the mode to by date, by week, or by month.
3) Set the start and end date of the holiday.
4) Click OK.
Step 4 Set the schedule for the holiday recording. Refer to Chapter 8.4 Configuring Recording
Schedule for details.
8.12 Configuring Redundant Recording and Capture
Purpose
Enabling redundant recording and capture, which means saving the record files and captured
pictures not only in the R/W HDD but also in the redundant HDD, will effectively enhance the
data safety and reliability. .
You must set the storage mode to Group before you set the HDD property to Redundancy.
For detailed information, refer to Chapter 8.2.1 Configuring HDD Group. There should be
at least another HDD which is in Read/Write status.
Step 1 Go to Storage > Storage Device.
Step 2 Select an HDD from the list and click to enter the Local HDD Settings interface.
Step 3 Set the HDD property to Redundancy.