User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 55
7.2 Configuring PTZ Parameters
Purpose
Follow these procedures to set the PTZ parameters. The PTZ parameters configuration must
be done before you can control the PTZ camera.
Step 1 Click on the quick settings toolbar of the PTZ camera’s Live View. The PTZ control
panel displays on the right of the interface.
Step 2 Click PTZ Parameters Settings to set the PTZ parameters.
Figure 7-2 PTZ Parameters Settings
Step 3 Edit the PTZ camera parameters.
All the parameters should match the PTZ camera parameters.
Step 4 Click OK to save the settings.