User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 153
After configuration, you can access and manage your devices through Hik-Connect app
or www.hik-connect.com.
For more detailed instructions of Hik-Connect, refer to help on www.hik-connect.com.
16.3 Configuring DDNS
Purpose
You can set Dynamic DNS service for network access. Different DDNS modes are available:
DynDNS, PeanutHull, and NO-IP.
Before You Start
You must register the DynDNS, PeanutHull, or NO-IP service with your ISP before configuring
DDNS settings.
Step 1 Go to System > Network > TCP/IP > DDNS.
Step 2 Check Enable.
Step 3 Select DynDNS under DDNS Type.
PeanutHull and NO-IP are also available under DDNS Type, and required information
should be entered accordingly.
Step 4 Enter Server Address for DynDNS (i.e., members.dyndns.org).
Step 5 Under Device Domain Name, enter the domain name obtained from the DynDNS Website.
Step 6 Enter the User Name and Password registered in the DynDNS Website.