User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 54
Chapter 7 PTZ Control
7.1 PTZ Control Wizard
Before You Start
Make sure the connected IP camera supports the PTZ function and is properly connected.
Purpose
Follow the PTZ Control Wizard to guide you through the basic PTZ operations.
Step 1 Click on the quick settings toolbar of the PTZ camera’s Live View. The PTZ Control
Wizard pops up as below.
Figure 7-1 PTZ Control Wizard
Step 2 Follow the PTZ Control Wizard to adjust the PTZ view, focus, and zoom in/out.
Step 3 (Optional) Check Do not show this prompt again checkbox.
Step 4 Click OK to exit.