User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 151
Step 3 Configure other IP settings as needed.
Check the Enable DHCP checkbox to obtain IP settings automatically if a DHCP
server is available on the network.
Valid MTU value range is 500 to 9676.
Step 4 Click Apply.
16.1.2 Device with a Single Network Interface
Step 1 Go to System > Network > TCP/IP.
Figure 16-2 TCP/IP Settings
Step 2 Configure network parameters as needed.
Check the Enable DHCP checkbox to obtain IP settings automatically if a DHCP
server is available on the network.
Valid MTU value range is 500 to 9676.
Step 3 Click Apply.