User Manual

Network Video Recorder User Manual
UM NVR v4.xx 111717NA 114
• Notify Surveillance Center
It will send an exception or alarm signal to the remote alarm host when an event
occurs. The alarm host refers to the PC installed with Remote Client.
The alarm signal will be transmitted automatically at detection mode when a remote
alarm host is configured. Refer to Chapter 16.8 Configure Ports for alarm host
configuration.
• Send Email
It will send an e-mail with alarm information to the user when an alarm is detected.
Refer to 16.7 Configuring E-Mail for e-mail configuration details.
Step 3 Check the checkbox to select the alarm output when an alarm is triggered.
To trigger an alarm output when an event occurs, refer to Chapter 12.6.3 Configuring
Alarm Output to set the alarm output parameters.
Step 4 Click Trigger Channel and select one or more channels that will record/capture or
perform full-screen monitoring when a motion alarm is triggered.
You have to set the recording schedule to realize this function. Refer to Refer to Chapter
8.4 Configuring Recording Schedule for setting the recording schedule.
Step 5 Click Apply to save the settings.
12.3 Configuring Motion Detection Alarms
Motion Detection enables the device to detect moving objects in the monitored area and
trigger alarms.
Step 1 Go to System > Event > Normal Event > Motion Detection.