User Manual

Network Video Recorder User Manual
109
Step 5 Check the radio button of Enable One-Key Disarming.
Figure 11-8 One-Key Alarm Disarming
Step 6 Select the alarm linkage action (s) you want to disarm for the local alarm input1.
When the alarm input 1 (Local<-1) is enabled with one-key disarming, the other alarm input
settings are not configurable.
Step 7 Click Apply to save the settings.
11.6.3 Configure Alarm Output
Trigger an alarm output when an alarm is triggered.
Step 1 Go to System > Event > Normal Event > Alarm Output.
Step 2 Select an alarm output item from the list and click .
Step 3 Edit the alarm name.
Step 4 Select the dwell time (the alarm duration) from 5s to 600s, or Manually Clear.
Manually Clear: you should manually clear the alarm when the alarm occurs. Refer to Chapter
11.8 Trigger or Clear Alarm Output Manually for detailed instructions.
Step 5 Set the arming schedule. Refer to Chapter 11.1 Configure Arming Schedule.