User's Manual

Network Video Recorder User Manual
95
5.8 Configuring Redundant Recording
Purpose:
Enabling redundant recording, which means saving the record files and captured pictures not only
in the R/W HDD but also in the redundant HDD, will effectively enhance the data safety and
reliability. .
Step 1 Enter HDD Information interface.
Menu> HDD
Figure 5-22 HDD General
Step 2 Select the HDD and click to enter the Local HDD Settings interface.
1) Set the HDD property to Redundancy.
Figure 5-23 HDD General-Editing
2) Click Apply to save the settings.
3) Click OK to back to the upper level menu.
You must set the Storage mode in the HDD advanced settings to Group before you set the HDD
property to Redundant. For detailed information, please refer to Chapter 11.4.1 Setting HDD
Property. There should be at least another HDD which is in Read/Write status.
Step 3 Enter the Record setting interface.
Menu> Record> Parameters
1) Select Record tab.