User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Getting Started
- 2.1 Device Startup and Activation
- 2.2 Using Wizard for Basic Configuration
- 2.3 Adding and Connecting the IP Cameras
- Chapter 3 Live View
- Chapter 4 PTZ Controls
- Chapter 5 Recording Settings
- 5.1 Configuring Parameters
- 5.2 Configuring Recording Schedule
- 5.3 Configuring Motion Detection Recording
- 5.4 Configuring Alarm Triggered Recording
- 5.5 Configuring VCA Event Recording
- 5.6 Manual Recording
- 5.7 Configuring Holiday Recording
- 5.8 Configuring Redundant Recording
- 5.9 Configuring HDD Group for Recording
- 5.10 Files Protection
- Chapter 6 Playback
- Chapter 7 Backup
- Chapter 8 Alarm Settings
- Chapter 9 VCA Alarm
- Chapter 10 VCA Search
- Chapter 11 Network Settings
- Chapter 12 HDD Management
- Chapter 13 Camera Settings
- Chapter 14 NVR Management and Maintenance
- Chapter 15 Others
- Chapter 16 Appendix
Network Video Recorder User Manual
201
14.4 Importing/Exporting Configuration File
Purpose:
The configuration files of the NVR can be exported to local device for backup; and the
configuration files of one NVR can be imported to multiple NVR devices if they are to be
configured with the same parameters.
14.4.1 Exporting Configuration File
Before you start:
Insert a USB flash disk to the device. For importing the configuration file, the configuration file
must be available in the USB flash disk.
Step 1 Enter the Export Configuration File interface.
Menu > Maintenance > Export
Figure 14-6 Import/Export Config File
Step 2 Select a USB flash disk.
Step 3 Click Export.
Step 4 Input the admin password.
Step 5 Export configuration file to the selected local backup device.
14.4.2 Importing Configuration File
Before you start:
Insert a USB flash disk with the configuration file to the device.
Step 1 Enter the Export Configuration File interface.