Quick Start Guide

DS-76xxNI-QxxP NVR Quick Start Guide
QSG DS-76xxNI-QxxP 062618NA 14
3.6 Using the Setup Wizard
The Setup Wizard can walk you through some important settings of the device. By default, the Setup
Wizard starts once the device has loaded.
Check the checkbox to enable Setup Wizard when device starts. Click Next to continue the setup
wizard. Follow the guide of the Setup Wizard to configure the system resolution, system date/time,
network settings, HDD management, record settings, etc.
Figure 17, Wizard
3.7 Network Settings
Purpose:
Network settings must be properly configured before you operate the NVR over a network.
Step 1 Enter the Network Settings interface, Menu > Configuration > Network .