Quick Start Guide

DS-76xxNI-QxxP NVR Quick Start Guide
QSG DS-76xxNI-QxxP 062618NA 12
Figure 13, Warning of Weak Password
3.4 Using the Unlock Pattern for Login
For the Admin user, you can configure the unlock pattern for device login.
After the device is activated, enter the following interface to configure the device unlock pattern.
Step 1 Use the mouse to draw a pattern among the nine dots on the screen. Release the mouse when
the pattern is done.
Figure 14, Draw the Pattern
• Connect at least four dots to draw the pattern.
• Each dot can be connected once only.
Step 2 Draw the same pattern again to confirm it. When the two patterns match, the pattern is
configured successfully.
Step 3 You can use the configured unlock pattern for future logins.