Quick Start Guide

DS-76xxNI-QxxP NVR Quick Start Guide
QSG DS-76xxNI-QxxP 062618NA 10
Chapter 3 Menu Operation
3.1 Menu Structure
Refer to the following figure for the menu structure:
Figure 10, Menu Structure
The menu structure may vary by model.
3.2 Startup and Shutdown
Proper startup and shutdown procedures are crucial to expanding the life of the NVR. To start your NVR:
Step 1 Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an
Uninterruptible Power Supply (UPS) be used in conjunction with the device. The Power button)
on the front panel should be red, indicating the device is receiving the power.
Step 2 Press the POWER button on the front panel. The Power LED should turn blue. The unit will begin
to start.
After the device starts up, the wizard will guide you through the initial settings, including
modifying password, date and time settings, network settings, HDD initializing, and recording.
To shut down the NVR:
Step 1 Enter the Shutdown menu, Menu > Shutdown .
Figure 11, Shutdown
Step 2 Select the Shutdown button.
Step 3 Click the Yes button.