Quick Start Guide

Network Video Recorder Quick Start Guide
38
Purpose:
The device supports the RAID storage function. Through one-touch configuration, you can quickly
create the disk array. By default, the array type to be created is RAID 5.
Before you start:
As the default array type is RAID 5, at least 3 HDDs must be installed in you device. And if more
than 10 HDDs are installed, 2 arrays can be configured.
It is recommended to use the same enterprise-level HDDs (including model and capacity) for array
creation and configuration so as to maintain reliable and stable running of the disks.
Step 1 Enter the Physical Disk Settings interface.
Menu > HDD > RAID
Figure 3-12 RAID Settings Interface
Step 2 Click One-touch Configuration to enter the One-touch Array Configuration interface.
Figure 3-13 One-touch Array Configuration
Step 3 Edit the array name in the Array Name text field and click OK button to start configuring
array.