User Manual

Note
• Check Enable DHCP to obtain IP
sengs automacally if a DHCP server is available on the
network.
• Valid MTU value range is 500 to 9676.
1.3 HDD Sengs
Ensure the video recorder storage media is well. You can install at least one HDD and inialize it, or
create a RAID and inialize it.
1.4 Add Network Camera
Before you can get live video or record the video les, you must add the network cameras to the
connecon list of the device.
Before You Start
Ensure the network connecon is valid and correct and the IP camera to add has been acvated.
Steps
1. Click
on the main menu bar.
2. Click Custom Add tab on the tle bar.
Figure 1-9 Add IP Camera
3. Enter IP address, protocol, management port, and other IP camera informaon to add.
4. Enter the login user name and password of the IP camera.
5. Click Add to
nish the adding of the IP camera.
6. Oponal: Click Connue to Add to connue to add addional IP cameras.
Network Video Recorder User Manual
8