User Manual

ManualsBrandsHikvision ManualsBackupDS-7608NI-I2-8P

Table Of Contents

Legal Information
Regulatory Information
Applicable Model
Content Convention
Symbol Conventions
Chapter 1 Basic Operation
- 1.1 Activate Your Device
- 1.2 Configure TCP/IP Settings
- 1.3 HDD Settings
- 1.4 Add Network Camera
- 1.5 Platform Access
  - 1.5.1 Configure EHome
  - 1.5.2 Configure Hik-Connect
Chapter 2 IoT
- 2.1 Add an IoT Device
  - 2.1.1 Add an Access Control Device
  - 2.1.2 Add an Alarm Device
- 2.2 Configure the Linkage Action and Arming Schedule
- 2.3 Configure OSD
- 2.4 Search the IoT Record
- 2.5 IoT Video/Picture
  - 2.5.1 Configure the Event Recording/Capturing
  - 2.5.2 Search the IoT Video/Picture
Chapter 3 Live View
- 3.1 Start Live View
- 3.2 Digital Zoom
- 3.3 Fisheye View
- 3.4 3D Positioning
- 3.5 Configure Channel-Zero Encoding
- 3.6 PTZ Control
Chapter 4 Recording and Playback
- 4.1 Recording
- 4.2 Playback
- 4.3 Playback Operations
  - 4.3.1 Edit Video Clips
  - 4.3.2 Thumbnails View
Chapter 5 Picture Capture
- 5.1 Configure Parameters
- 5.2 Configure Capture Schedule
- 5.3 Configure Holiday Capture Schedule
Chapter 6 Event
- 6.1 Normal Event Alarm
- 6.2 VCA Event Alarm
- 6.3 Configure Arming Schedule
- 6.4 Configure Linkage Actions
Chapter 7 Smart Analysis
- 7.1 People Counting
- 7.2 Heat Map
Chapter 8 POS Configuration
- 8.1 Configure POS Connection
- 8.2 Configure POS Text Overlay
- 8.3 Configure POS Alarm
Chapter 9 Camera Settings
- 9.1 Configure Image Parameters
- 9.2 Configure OSD Settings
- 9.3 Configure Privacy Mask
- 9.4 Import/Export IP Camera Configuration Files
- 9.5 Upgrade IP Cameras
Chapter 10 Storage
- 10.1 Storage Device Management
- 10.2 Disk Array
  - 10.2.1 Create a Disk Array
    - One-Touch Creation
    - Manual Creation
  - 10.2.2 Rebuild an Array
Chapter 11 Hot Spare Recorder Backup
- 11.1 Set Hot Spare Device
- 11.2 Set Working Recorder
- 11.3 Manage Hot Spare System
Chapter 12 Network Settings
- 12.1 Configure DDNS
- 12.2 17.3 Configure PPPoE
- 12.3 Configure SNMP
- 12.4 Configure Email
- 12.5 Configure Port Mapping (NAT)
- 12.6 Configure Port
- 12.7 Configure ONVIF
Chapter 13 File Management
- 13.1 Search Files
- 13.2 Search History Operation
- 13.3 Export Files
Chapter 14 User Management and Security
- 14.1 Manage User Accounts
- 14.2 Manage User Permissions
- 14.3 Configure Password Security
- 14.4 Reset Password
Chapter 15 System Management
- 15.1 Configure Device
- 15.2 Configure Time
- 15.3 Network Detection
- 15.4 Storage Device Maintenance
- 15.5 Upgrade System
  - 15.5.1 Upgrade Device
  - 15.5.2 Upgrade IP Cameras
- 15.6 Import/Export IP Camera Configuration Files
- 15.7 Import/Export Device Configuration Files
- 15.8 Log Management
- 15.9 Restore Default Settings
- 15.10 Security Management
Chapter 16 Appendix
- 16.1 Glossary
- 16.2 Communication Matrix
- 16.3 Device Command
- 16.4 Frequently Asked Questions

Chapter 1 Basic Operaon

1.1 Acvate Your Device

1.1.1 Default User and IP Address

•

Default administrator account: admin.

• Default IPv4 address: 192.168.1.64.

1.1.2

Acvate via Local Menu

For the rst-me access, you need to acvate the device by seng an admin password. No

operaon is allowed before acvaon. You can also acvate the device via web Browser, SADP or

client

soware.

Steps

1. Enter the admin password twice.

Figure 1-1 Acvate via Local Menu

Network Video Recorder User Manual