Quick Start Guide

Network Video Recorder Quick Start Guide
30
The function is only available when you use HIKVISION protocol.
Step 6 (Optional) Check Verify Certificate to verify the camera with certificate. The certificate is a form of
identification for the camera that provides more secure camera authentication. It requires to
import the IP camera certificate to the NVR first when you use this function.
1) Log in the IP camera by web browser.
2) Go to Configuration > Network > Advanced Settings > HTTPS on the web browser o to export
its certificate.
3) Click Export at Export Certificate to save the certificate.
4) Log in the NVR by web browser.
5) Go to Configuration > System > Security > Trusted Root Certification Authorities > Import
6) Click Import to import the IP camera certificate.
The function is only available when you use HIKVISION protocol.
Step 7 Click Add to finish adding the IP camera.
Step 8 (Optional) Click Continue to Add to continue to add other IP cameras.
3.8 Start Live View
Enter the live view mode ( ).
 Select a window and double click a camera from the list to play the video from the camera in
the selected window.
 Use the toolbar at the playing window bottom to realize the capture, instant playback, audio
on/off, digital zoom, live view strategy, show information, start/stop recording, etc.
3.9 One-Touch RAID Configuration
The RAID is supported by DS-9600NI-I8 and DS-9600NI-I16 Series NVRs only.
The device supports the RAID storage function. Through one-touch configuration, you can quickly
create the disk array. By default, the array type to be created is RAID 5.
Before You Start
 Enable RAID function.