User Manual

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 54
Figure 61, PTZ Panel General
4. Click to enter the preset No. in the corresponding text field.
5. Click Call Preset to call it.
When the camera/dome connected and the PTZ protocol is set to UTC,
you can call preset 95 to enter the menu of the connected camera/dome.
Use the directional buttons on the PTZ control panel to operate the
menu.
4.2.3 Customizing Patrols
Purpose
Patrols can be set to move the PTZ camera to different key points and have it
stay there for a set duration before moving on to the next key point. The key
points correspond to the presets. The presets can be set following the steps
above in Customizing Presets.
1. Go to Menu > Camera > PTZ.