User Manual

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 163
Figure 218, RAID Workflow
12.1.1 Enable RAID
Purpose
You must enable the RAID function before you can create the disk array.
1. Enter the Disk Mode configuration interface, Menu >
System
Configuration > HDD
Figure 219, Enable RAID Interface
2. Check the Enable RAID checkbox.
3. Click Apply to save the settings.
4. Reboot the device to have the RAID take effect.
12.1.2 One-Touch Configuration
Purpose
Through one-touch configuration, you can quickly create the disk array. By
default, the array type to be created is RAID 5.