User Manual

DS-73xxHUI-K4, DS-73xxHQI-K4, DS-90xxHUI-K8 DVR User Manual
UM DS-73xxHUI-K4 DS-73xxHQI-K4 DS-90xxHUI-K8 092017NA 168
Before You Start
Make sure the hot spare disk is configured.
1. Enter the Physical Disk Settings interface to configure the hot spare disk.
Figure 228, Physical Disk Settings Interface
2. Select a disk and click to set it as the hot spare disk.
Only global hot spare mode is supported.
12.1.5 Automatically Rebuilding Array
Purpose
When the virtual disk is in Degraded status, the device can start rebuilding
the array automatically with the hot spare disk to ensure the high security
and reliability of the data.
1. Enter the Array Settings interface, Menu > System Configuration > HDD >
RAID > Array. The status of the array is Degraded. Since the hot spare disk
is configured, the system will automatically start rebuilding using it.