Operation Manual

Table Of Contents

User Manual of DS-7200/7300/8100-SH Series DVR

3. Use the directional and zoom / focus / iris buttons on the PTZ control panel to steer the camera to the

desired view, and click the button Left Limit / Right Limit to set the left / right limit point.

Calling Linear Scan

Purpose:

The PTZ camera will horizontally auto scan between the two predefined limit points.

Steps:

1. Click the button in the lower-right corner of the PTZ setting interface;

or press the PTZ button on the front panel;

or click the PTZ Control icon in the quick setting toolbar during the live view process;

or click PTZ Control on the right-click menu to open the PTZ control panel in live view mode.

2. Select the PTZ camera from the drop-down list for control.

3. Click the icon on the panel and then click the One-touch tab to enter the One-touch control

interface.

4. Click the Linear Scan button to start the linear scan.

5. To stop the linear scan, you can click the Linear Scan button again on the panel.

6. You can click the Restore button and then reboot the PTZ camera to clear the limit points information.

Figure 4. 25 Control Panel-Call Linear Scan

4.2.3 One-touch Park