Operation Manual

Table Of Contents
User Manual of DS-7200/7300/8100-SH Series DVR
103
Playback by alarm input search is supported by DS-7224/7232-SH, DS-7300-SH and DS-8100-SH models
only.
Steps:
1. Enter the playback interface.
Menu>Playback
2. Click and select to enter the Event Playback interface.
3. Select Alarm Input, Motion, Line Crossing Detection or Intrusion Detection as the event type, and
specify the start time and end time for search.
The line crossing detection or intrusion detection search is supported by the Smart HDVR/DVR only.
Figure 6. 6 Video Search by Motion Detection
4. Click Search, and the record files matching the search conditions will be displayed on a list.
5. Select and click button to play back the record files.
You can click Back to return to the search interface.
If there is only one channel triggered, clicking button takes you to Full-screen Playback interface of
this channel.
If several channels are triggered, clicking button takes you to the synch playback interface. Check
checkbox to select one channel for playback or select multiple channels for synchronous playback.
The max. number of channels for synchronous playback supported varies to different models.