Spec Sheet

7 | P a g e
STEP 4 – Port Forwarding (continued)
It’s important to note that each and every router encountered may have a slightly different GUI
interface, so most of the following instruction is based on theory rather than a direct step-by-step
translation. Luckily, most routers use the same verbiage to refer to “Port Forwarding.” The challenge is
to locate exactly which section of the menu system is associated with the programming information we
will be entering. With the router used in the example, the Port Forwarding rules referring back to the
recorder that we statically addressed as “192.168.1.200” look as follows:
With these rules as written above, we are allowing all “incoming” internet traffic on ports 8000, 9999,
and 10554 to be routed to the NVR’s internal “LAN” address of 192.168.1.200.