First Choice For Security Professionals Quick Start Guide DVR DS-7300HWI-SH Series DVR DS-7200HWI-SH Series DVR NOTE: For more detailed information, refer to the User’s Manual on the CD-ROM. You must use your PC or MAC to access the files. www.hikvision.
First Choice For Security Professionals Quick Start NOTE: Connect VGA monitor and mouse before starting. 1. Overview 2. Connection 3. Start Up/Shutdown 4. Formatting a Disk 5. Setting Date & Time 6. Recording 7. Playback 8. Backup 9. Network Connection NOTE: For more detailed information, refer to the User’s Manual on the CD-ROM. You must use your PC or MAC to access the files.
DVR 1. Overview BEFORE STARTING: Connect VGA monitor and mouse (mouse supplied). Check that your package includes the following: DVR Mouse Hard Drive (PreInstalled) IR Remote HDD Cables Rack Mount Ears Power Cord Quick Start Guide Front Panel Description: 1 3 4 2 5 7 6 1. Power Button 2. Status Indicators 3. Alphanumeric Buttons 4. IR Receiver 8 5. USB Ports 6. DVD-R/W 7. Control Buttons 8. Direction/Enter Button 9.
First Choice For Security Professionals 2. Connection Internet PC VGA Monitor HDMI Monitor CVBS Monitor Speaker Router Ethernet PC USB Mouse Alarm Output Keyboard IR Remote Alarm Input Audio Input Dome Camera Box Camera IR Dome Camera USB Device IR Bullet Camera 3. Startup and Shutdown To startup your DVR: 1. Plug power cord into DVR and electrical outlet. It is HIGHLY recommended to use a surge protector. 2. Connect a VGA or HDMI monitor and mouse into the DVR.
First Choice For Security Professionals 3. Startup and Shutdown (cont.) To shut down your DVR: OPTION 1: Standard Shutdown 1. Enter the Shutdown menu by going to Main Menu > Maintenance. 2. Click Shutdown button to access the Shutdown menu. 3. Select the Shutdown button. 4. Click the Yes button. OPTION 2: Manual Shutdown 1. Press and hold the POWER button for 3 seconds. 2. Enter the administrator's username and password in the dialog box for authentication. 3. Click the Yes button.
DVR 4. Formatting a Disk (cont.) 3. Click the Init button. 4. A confirmation message will appear on the screen. Click the OK button to continue formatting process. 5. The status column will show the Initialization progress. After the disk has been formatted, the status of the disk will change to Normal. 6. Click the button to exit out of Disk Management. 5. Setting Date & Time To setup date and time: 1. Enter the Time/Date menu by going to Main Menu > System Configuration > General > Time/Date. 2.
First Choice For Security Professionals 6. Recording To setup recording schedule: You can set the recording through two ways: OPTION1: Right click to access the menu. Select Start Recording from the list, select either Continuous Record or Event Record. This will apply a 24/7 recording for all active channels. OPTION2: 1. Enter the Schedule Configuration menu by going to Main Menu > Recording Configuration > Schedule. 2. Select a camera to configure from the camera drop down menu. 3.
First Choice For Security Professionals 7. Playback Playback from Search: 1. Enter the Playback menu by going to Main Menu > Playback. 2. Select the camera and date you want to search. 3. The search results will be shown on the timeline with blue bars designating recorded files. 4. Click a time on the timeline, and then click Play Forward window. button below the video preview Playback Multiple Channels 1. Follow the steps mentioned above to playback the video. 2.
HYBRID DVR/NVR 8. Backup Backup recorded files (Export): 1. Enter the File Management menu by going to Main Menu > File Management 2. Place a check next to the cameras you want to search files for backup. Select the recording type, date and time range you want to backup. Click on Search. 3. A search results window will display your results. You may click the Play button to verify that these files are indeed the ones you would like to backup.
First Choice For Security Professionals 9. Network Connection Network Connection Using Web Browsers All Hikvision products use the default IP address of 192.0.0.64 1. Connect a CAT5 or CAT6 cable from the DVR to a PC or Laptop computer. Note your laptop or PC computers existing address, such as: IP: Subnet: 192.0.0.62 255.255.255.0 2. Open web browser. 3. In the address bar, type 192.0.0.64 If prompted, allow the installation of the Hikvision application.
First Choice For Security Professionals 908 Canada Court City of Industry, CA 91748 U.S.A. www.hikvision.
