User Manual

DS-72xxHUI-Kx, DS-72xxHQI-Kx Digital Video Recorder (DVR) User Manual
UM DS-72xxHUI-Kx, DS-72xxHQI-Kx 062817NA 139
11.2 Configuring Advanced Settings
11.2.1 Configuring PPPoE Settings
The DVR allows access by Point-to-Point Protocol over Ethernet (PPPoE).
1. Enter the N
etwork Settings interface, Menu > Configuration > Network.
2. Select the PPPoE tab to enter the PPPoE Settings interface.
Figure 172, PPPoE Settings Interface
3. Check the Enable PPPoE checkbox to enable this feature.
4. Enter User Name and Password for PPPoE access.
The User Name and Password are assigned by your ISP.
5. Click Apply to save the settings.
6. After successful settings, the system asks you to re
boot the device to enable the new settings, and
the PPPoE dial-up is automatically connected after reboot.
7. You can go to Menu > Maintenance > System Info > Network interface to view the status of PPPoE
connection.
11.2.2 Configuring Hik-Connect
Hik-Connect provides a mobile phone application and service platform page (www.hik-connect.com) to
access and manage the DVR for convenient remote access to the surveillance system.
Hik-Connect can be enabled via SADP software, the system GUI,
and Web browser. We describe the GUI operation steps in this
section.
1. Enter the Network Settings interface, Menu > Configuration > Network.
2. Select the P
latform Access tab to enter the Hik-Connect Settings interface.