Operation Manual

User Manual of Digital Video Recorder

128

Figure 8. 17 Set Direction of Line Crossing Detection

3) Set the sensitivity of the line crossing detection to 1-100.

4) Click and set two points in the preview window to draw a virtual line.

Figure 8. 18 Draw Virtual Line in the Image

You can use the to clear the existing virtual line and re-draw it.

5) Click Apply to save the settings.

Task2: Configure the Intrusion Detection.

1) Select the intrusion region from the drop-down list. Up to 4 regions are selectable.

2) Select the sensitivity of the intrusion detection to 1-100.

3) Set the percentage to 1-100. Percentage defines the ratio of the in-region part of the object which can

trigger the alarm. For example, when you set the percentage as 50%, half of the object entering the

region will trigger the alarm.

Figure 8. 19 Set Intrusion Detection

4) Set the time threshold to 0-10 sec. When the duration of the object in the defined detection area is