How to Guide

3. Check Enable Heat Map checkbox to enable the function;
4. Go to Area Settings to draw detection area. Draw area by left click the
end-points in the live view window, and right click to finish the area drawing;
5. Configure the parameters for drawn area;
 Detection Sensitivity [0~100]: It refers to the sensitivity of the camera identify a target.
It is recommended you set the sensitivity as the default value, which is 50.
 Background Update Rate [0~100]: It refers to the speed of the new scene replaces the
previous scene. The default value of 50 is recommended.
 Scene Change Level [0~100]: It refers to level of the camera responses to the dynamic
environment, The default level is 50.
 Minimum Target Size [0~100]: It refers to the size of the camera identify a target. You
can set the target size according to the actual environment. The default size is 50.
6. Click Save to save the settings.
How to Check Heat Map Performance:
You can search and export heat map report in the video recorder locally.
Steps:
1. Go to Menu > VCA Search > Heat Map;