How to Guide

Title:
How to use remote control
Version:
v1.0
Date:
10/7/2017
Product:
Dvrs,Nvrs
Page:
2 of 6
2 / 4
How to use remote control
In this document, it mainly introduces how to use remote control to realize function of
playback.
1. Enter playback
Press the "PLAY" button to enter the playback screen of the current channel (the first
one in the upper left corner). To exit the playback screen, press the "ESC" key.
2. Select other channels for playback
Path: press the "PLAY" button to enter the playback interface. Select the numeric key
for the remote control, 10 channels above need to be pressed 2 times, such as eleventh
channels, press 2 consecutive1), complete the switching channel playback.
3. Realize quick release and slow release function
Path: press the "PLAY" button to playback interface. Use the remote control to go up
and down, The key to realize quick release and slow release function.
Note: the left and right keys are the post jump 30s and the front jump 30s, which are
different from the device's local panel.
4. Realize the specific day of video playback
Press "PLAY" button to playback interface, and then press the "PLAY" button again
to enter the playback control module, use the arrow keys, jump down to the lower right
corner of the calendar bar, at this time, the calendar column of the month is shown as
green, such as Figure below: