Operation Manual

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR
82
play
Previous file
Next file
Video search
Exit
Hide toolbar
Progress bar
Video type bar
Note:
1. Playback progress bar: use the mouse to click any point of the progress bar or drag the progress bar to
locate special frames.
2. About video type bar: represents normal recording (manual or schedule); represents event
recording; represents smart search recording.
6.1.4 Playing Back by Event Search
Purpose:
Play back record files on one or several channels searched out by restricting event type (motion detection or
alarm input). Channel switch is supported.
Note: Playback by alarm input search is supported by DS-7224/7232-SH, DS-7300-SH and DS-8100-SH
models only.
Steps:
1. Enter the playback interface.
Menu>Playback
2. Select Event tab to enter the Event Playback interface.
3. Select Motion or Alarm Input as the event type.
4. Set the start time and end time for the selected event.
Figure 6.16 Video Search by Alarm Input
Figure 6.17 Video Search by Motion Detection
5. Select the camera (s) for searching of motion detected triggered record files or select the alarm input (s)