Operation Manual

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR
151
Figure 10.13 Set HDD Property
3. Set the HDD property to R/W, Read-only or Redundancy.
4. Click the OK button to save the settings and exit the interface.
5. In the HDD Information menu, the HDD property will be displayed in the list.
Note: At least 2 disks (HDD or network disk) must be installed or connected on your device when you want to set
a HDD to Redundancy, and there is one HDD with R/W property.