Operation Manual

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR
132
Menu > Configuration > Network
2. Select the UPnP™ tab to enter the UPnP™ interface.
Figure 9.20 UPnP™ Settings Interface
3. Check checkbox to enable UPnP™.
4. Select the mapped type to Auto or Manual.
When you select Auto, the mapping ports can be automatically assigned by the router. When you select
Manual, you should continue Step5 to edit the mapping ports.
5. Click to open the External Port Settings dialog box. Configure the external port No. for server port,
HTTP port and RTSP port respectively.
Notes:
1) You can use the default port No., or change it according to actual requirements.
2) External Port indicates the port No. for port mapping in the router.
Figure 9.21 External Port Settings Dialog Box
6. You can click Refresh to get the latest status of the port mapping.
Figure 9.22 UPnP Settings Finished
7. Click the Apply button to save the settings.