Operation Manual

User Manual of DS-7200-SH/SV/SL and DS-7300/8100-SH Series DVR
125
Steps (for DS-8100-SH):
1. Enter the Network Settings interface.
Menu > Configuration > Network
2. Select the General tab.
Figure 9.3 General Network Settings of DS-8100-SH
Note: The DS-8100-SH models provide two 10M/100M/1000Mbps self-adaptive network interfaces.
3. Select the working mode.
Multi-address Mode: The parameters of the two NIC cards can be configured independently. You can
select LAN1 or LAN2 in Select NIC field for parameter settings.
You can select one NIC card as default route. And when the system is connecting with the extranet the
data will be forwarded through the default route.
Figure 9.4 Multi-address Working Mode
Load Balance Mode: By using the same IP address, two NIC cards share the load of the total bandwidth,
which enables the system to provide two Gigabit network capacity.