User Manual
Table Of Contents
- 1.1 Product Key Features
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Live View
- 3.1 Introduction of Live View
- 3.2 Operations in Live View Mode
- 3.3 Channel-Zero Encoding
- 3.4 Adjusting Live View Settings
- 3.5 Manual Video Quality Diagnostics
- Chapter 4 PTZ Controls
- Chapter 5 Recording and Capture Settings
- 5.1 Configuring Encoding Parameters
- 5.2 Configuring Recording and Capture Schedule
- 5.3 Configuring Motion Detection Recording and Capture
- 5.4 Configuring Alarm Triggered Recording and Capture
- 5.5 Configuring Event Recording and Capture
- 5.6 Configuring Manual Recording and Continous Capture
- 5.7 Configuring Holiday Recording and Capture
- 5.8 Configuring Redundant Recording and Capture
- 5.9 Configuring HDD Group
- 5.10 Files Protection
- 5.11 One-Key Enabling and Disabling H.264+ for Analog Cameras
- 5.12 Configuring 1080P Lite
- Chapter 6 Playback
- 6.1 Playing Back Record Files
- 6.2 Auxiliary Functions of Playback
- Chapter 7 Backup
- Chapter 8 Alarm Settings
- Chapter 9 POS Configuration
- Chapter 10 VCA Alarm
- 10.1 Face Detection
- 10.2 Vehicle Detection
- 10.3 Line Crossing Detection
- 10.4 Intrusion Detection
- 10.5 Region Entrance Detection
- 10.6 Region Exiting Detection
- 10.7 Loitering Detection
- 10.8 People Gathering Detection
- 10.9 Fast Moving Detection
- 10.10 Parking Detection
- 10.11 Unattended Baggage Detection
- 10.12 Object Removal Detection
- 10.13 Audio Exception Detection
- 10.14 Defocus Detection
- 10.15 Sudden Scene Change
- 10.16 PIR Alarm
- Chapter 11 VCA Search
- Chapter 12 Network Settings
- Chapter 13 RAID
- Chapter 14 HDD Management
- Chapter 15 Camera Settings
- Chapter 16 DVR Management and Maintenance
- Chapter 17 Others
- Chapter 18 Appendix
- 18.1 Specifications
- 18.1.1 DS-7100HGHI-E1
- 18.1.2 DS-7200HGHI-E1
- 18.1.3 DS-7200HGHI-E2
- 18.1.4 DS-7100HGHI-F1
- 18.1.5 DS-7200HGHI-F1
- 18.1.6 DS-7200HGHI-F2
- 18.1.7 DS-7100HQHI-F1/N
- 18.1.8 DS-7200HQHI-F1/N
- 18.1.9 DS-7200HQHI-F2/N
- 18.1.10 DS-7100HGHI-F1/N
- 18.1.11 DS-7200HGHI-F1/N
- 18.1.12 DS-7200HUHI-F1/N
- 18.1.13 DS-7200HUHI-F2/N
- 18.1.14 DS-7600HUHI-F/N
- 18.1.15 DS-7300HUHI-F4/N
- 18.1.16 DS-8100HUHI-F8/N
- 18.1.17 DS-9000HUHI-F8/N
- 18.1.18 DS-9000HUHI-F16/N
- 18.1.19 DS-7300HQHI-F4/N
- 18.1.20 DS-8100HQHI-F8/N
- 18.2 Glossary
- 18.3 Troubleshooting
- 18.4 Summary of Changes
- 18.5 List of Compatible Hikvision IP Cameras
- 18.6 List of Compatible Third-Party IP Cameras
- 18.1 Specifications
Digital Video Recorder User Manual
34
functioning properly.
Tx/Rx
Turns blue when the device is in armed status; at this
time, an alarm is enabled when an event is detected.
GUARD
Turns off when the device is unarmed. The
arm/disarm status can be changed by pressing and
holding on the ESC button for more than 3 seconds in
live view mode.
Turns red when a sensor alarm is detected.
2
IR Receiver
Receiver for IR remote
3
Front Panel Lock
Lock or unlock the panel by the key.
4
DVD-R/W
Slot for DVD-R/W.
5
Alphanumeric
Buttons
Switches to the corresponding channel in live view or
PTZ control mode.
Inputs numbers and characters in edit mode.
Switches between different channels in playback
mode.
Turns blue when the corresponding channel is
recording; turns red when the channel is in network
transmission status; turns pink when the channel is
recording and transmitting.
6
USB Interfaces
Universal Serial Bus (USB) ports for additional devices
such as USB mouse and USB Hard Disk Drive (HDD).
7
ESC
Returns to the previous menu.
Presses for arming/disarming the device in live view
mode.
REC/SHOT
Enters the Manual Record settings menu.
Presses this button followed by a numeric button to
call a PTZ preset in PTZ control settings.