User Manual
Table Of Contents
- 1.1 Product Key Features
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Live View
- 3.1 Introduction of Live View
- 3.2 Operations in Live View Mode
- 3.3 Channel-Zero Encoding
- 3.4 Adjusting Live View Settings
- 3.5 Manual Video Quality Diagnostics
- Chapter 4 PTZ Controls
- Chapter 5 Recording and Capture Settings
- 5.1 Configuring Encoding Parameters
- 5.2 Configuring Recording and Capture Schedule
- 5.3 Configuring Motion Detection Recording and Capture
- 5.4 Configuring Alarm Triggered Recording and Capture
- 5.5 Configuring Event Recording and Capture
- 5.6 Configuring Manual Recording and Continous Capture
- 5.7 Configuring Holiday Recording and Capture
- 5.8 Configuring Redundant Recording and Capture
- 5.9 Configuring HDD Group
- 5.10 Files Protection
- 5.11 One-Key Enabling and Disabling H.264+ for Analog Cameras
- 5.12 Configuring 1080P Lite
- Chapter 6 Playback
- 6.1 Playing Back Record Files
- 6.2 Auxiliary Functions of Playback
- Chapter 7 Backup
- Chapter 8 Alarm Settings
- Chapter 9 POS Configuration
- Chapter 10 VCA Alarm
- 10.1 Face Detection
- 10.2 Vehicle Detection
- 10.3 Line Crossing Detection
- 10.4 Intrusion Detection
- 10.5 Region Entrance Detection
- 10.6 Region Exiting Detection
- 10.7 Loitering Detection
- 10.8 People Gathering Detection
- 10.9 Fast Moving Detection
- 10.10 Parking Detection
- 10.11 Unattended Baggage Detection
- 10.12 Object Removal Detection
- 10.13 Audio Exception Detection
- 10.14 Defocus Detection
- 10.15 Sudden Scene Change
- 10.16 PIR Alarm
- Chapter 11 VCA Search
- Chapter 12 Network Settings
- Chapter 13 RAID
- Chapter 14 HDD Management
- Chapter 15 Camera Settings
- Chapter 16 DVR Management and Maintenance
- Chapter 17 Others
- Chapter 18 Appendix
- 18.1 Specifications
- 18.1.1 DS-7100HGHI-E1
- 18.1.2 DS-7200HGHI-E1
- 18.1.3 DS-7200HGHI-E2
- 18.1.4 DS-7100HGHI-F1
- 18.1.5 DS-7200HGHI-F1
- 18.1.6 DS-7200HGHI-F2
- 18.1.7 DS-7100HQHI-F1/N
- 18.1.8 DS-7200HQHI-F1/N
- 18.1.9 DS-7200HQHI-F2/N
- 18.1.10 DS-7100HGHI-F1/N
- 18.1.11 DS-7200HGHI-F1/N
- 18.1.12 DS-7200HUHI-F1/N
- 18.1.13 DS-7200HUHI-F2/N
- 18.1.14 DS-7600HUHI-F/N
- 18.1.15 DS-7300HUHI-F4/N
- 18.1.16 DS-8100HUHI-F8/N
- 18.1.17 DS-9000HUHI-F8/N
- 18.1.18 DS-9000HUHI-F16/N
- 18.1.19 DS-7300HQHI-F4/N
- 18.1.20 DS-8100HQHI-F8/N
- 18.2 Glossary
- 18.3 Troubleshooting
- 18.4 Summary of Changes
- 18.5 List of Compatible Hikvision IP Cameras
- 18.6 List of Compatible Third-Party IP Cameras
- 18.1 Specifications
Digital Video Recorder User Manual
322
channels of DVR with 16-ch video inputs. (Chapter 2.4.1 Configuring the Signal Input Wizard,
Chapter 2.7 Configuring the Signal Input Channel, Chapter 5.1 Configuring Encoding
Parameters)
For HQHI and DS-7200HUHI-F/N series DVR, if the 3 MP camera is connected to the channel
which supports up to 1080p signal input, it will switch to 1080p signal input. When the 3 MP
signal is switched to 1080p signal, the PAL will be switched to 1080p/25Hz, and the NTSC will
be switched to 1080p/30Hz. (Chapter 5.1 Configuring Encoding Parameters)
When HDTVI, AHD, or HDCVI input is connected, the information including the resolutuion and
frame rate will be overlaid on the bottom right corner of the live view for 5 seconds. When
CVBS input is connected, the information such as NTSC or PAL will be overlaid on the bottom
right corner of the live view for 5 seconds. (Chapter 2.4.1 Configuring the Signal Input Wizard,
Chapter 2.7 Configuring the Signal Input Channel)
When HDTVI, AHD, or HDCVI input is connected, you can view the information including the
input signal type, resolution and frame rate (e.g., HDTVI 720P25) on the Record Parameters
interface. When CVBS input is connected, you can view the information such as NTSC or PAL
on the Record Parameters interface. (Chapter 5.1 Configuring Encoding Parameters)
If DHCP is enabled, you can enable DNS DHCP or disable it and edit the Preferred DNS Server
and Alternate DNS Server. (Chapter 2.4.1 Configuring the Signal Input Wizard, Chapter 12.1
Configuring General Settings)
18.4.3 Version 3.4.70
Added:
New functions for DS-7100/7200HGHI-F and DS-7100/7200HQHI-F/N series DVR:
There is no signal input configuration interface. Four kinds of analog signal inputs including
HDTVI, AHD, HDCVI and CVBS can be connected. The analog signal inputs can be recognized
automatically and each two of the analog signal inputs can be mixed randomly. (Chapter 2.4.1
Configuring the Signal Input Wizard, Chapter 2.7 Configuring the Signal Input Channel)
When HDTVI, AHD, or HDCVI input is connected, the information including the resolutuion and
frame rate (e.g., 720P25) will be overlaid on the bottom right corner of the live view for 5
seconds. When CVBS input is connected, the information such as NTSC or PAL will be overlaid
on the bottom right corner of the live view for 5 seconds. When there is no video signal of the
analog channel, the connectable video signal type message will not be displayed on the screen.
(Chapter 2.4.1 Configuring the Signal Input Wizard, Chapter 2.7 Configuring the Signal Input
Channel)
When HDTVI, AHD, or HDCVI input is connected, you can view the information including the
input signal type, resolution and frame rate (e.g., HDTVI 720P25) on the Record Parameters
interface. When CVBS input is connected, you can view the information such as NTSC or PAL
on the Record Parameters interface. (Chapter 5.1 Configuring Encoding Parameters)