User Manual
Table Of Contents
- 1.1 Product Key Features
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Live View
- 3.1 Introduction of Live View
- 3.2 Operations in Live View Mode
- 3.3 Channel-Zero Encoding
- 3.4 Adjusting Live View Settings
- 3.5 Manual Video Quality Diagnostics
- Chapter 4 PTZ Controls
- Chapter 5 Recording and Capture Settings
- 5.1 Configuring Encoding Parameters
- 5.2 Configuring Recording and Capture Schedule
- 5.3 Configuring Motion Detection Recording and Capture
- 5.4 Configuring Alarm Triggered Recording and Capture
- 5.5 Configuring Event Recording and Capture
- 5.6 Configuring Manual Recording and Continous Capture
- 5.7 Configuring Holiday Recording and Capture
- 5.8 Configuring Redundant Recording and Capture
- 5.9 Configuring HDD Group
- 5.10 Files Protection
- 5.11 One-Key Enabling and Disabling H.264+ for Analog Cameras
- 5.12 Configuring 1080P Lite
- Chapter 6 Playback
- 6.1 Playing Back Record Files
- 6.2 Auxiliary Functions of Playback
- Chapter 7 Backup
- Chapter 8 Alarm Settings
- Chapter 9 POS Configuration
- Chapter 10 VCA Alarm
- 10.1 Face Detection
- 10.2 Vehicle Detection
- 10.3 Line Crossing Detection
- 10.4 Intrusion Detection
- 10.5 Region Entrance Detection
- 10.6 Region Exiting Detection
- 10.7 Loitering Detection
- 10.8 People Gathering Detection
- 10.9 Fast Moving Detection
- 10.10 Parking Detection
- 10.11 Unattended Baggage Detection
- 10.12 Object Removal Detection
- 10.13 Audio Exception Detection
- 10.14 Defocus Detection
- 10.15 Sudden Scene Change
- 10.16 PIR Alarm
- Chapter 11 VCA Search
- Chapter 12 Network Settings
- Chapter 13 RAID
- Chapter 14 HDD Management
- Chapter 15 Camera Settings
- Chapter 16 DVR Management and Maintenance
- Chapter 17 Others
- Chapter 18 Appendix
- 18.1 Specifications
- 18.1.1 DS-7100HGHI-E1
- 18.1.2 DS-7200HGHI-E1
- 18.1.3 DS-7200HGHI-E2
- 18.1.4 DS-7100HGHI-F1
- 18.1.5 DS-7200HGHI-F1
- 18.1.6 DS-7200HGHI-F2
- 18.1.7 DS-7100HQHI-F1/N
- 18.1.8 DS-7200HQHI-F1/N
- 18.1.9 DS-7200HQHI-F2/N
- 18.1.10 DS-7100HGHI-F1/N
- 18.1.11 DS-7200HGHI-F1/N
- 18.1.12 DS-7200HUHI-F1/N
- 18.1.13 DS-7200HUHI-F2/N
- 18.1.14 DS-7600HUHI-F/N
- 18.1.15 DS-7300HUHI-F4/N
- 18.1.16 DS-8100HUHI-F8/N
- 18.1.17 DS-9000HUHI-F8/N
- 18.1.18 DS-9000HUHI-F16/N
- 18.1.19 DS-7300HQHI-F4/N
- 18.1.20 DS-8100HQHI-F8/N
- 18.2 Glossary
- 18.3 Troubleshooting
- 18.4 Summary of Changes
- 18.5 List of Compatible Hikvision IP Cameras
- 18.6 List of Compatible Third-Party IP Cameras
- 18.1 Specifications
Digital Video Recorder User Manual
260
Guest: The Guest user has no permission of Two-way Audio in Remote Configuration and
only has the local/remote playback in the Camera Configuration by default.
User’s MAC Address: The MAC address of the remote PC which logs onto the DVR. If it is
configured and enabled, it only allows the remote user with this MAC address to access the
DVR.
Step 4 Click the OK button to save the settings and go back to the User Management interface.
The added new user will be displayed on the list, as shown in Figure 17-14.
Figure 17-14 Added User Listed in User Management Interface
Step 5 You can assign permissions for the added user.
1) Select the user from the list and then click to enter the Permission Settings interface,
as shown in Figure 17-15.
Figure 17-15 User Permission Settings Interface
2) Set the operating permission of Local Configuration, Remote Configuration and Camera
Configuration for the user.
Local Configuration
Local Log Search: Searching and viewing logs and system information of device.
Local Parameters Settings: Configuring parameters, restoring factory default
parameters and importing/exporting configuration files.