User Manual
Table Of Contents
- 1.1 Product Key Features
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Live View
- 3.1 Introduction of Live View
- 3.2 Operations in Live View Mode
- 3.3 Channel-Zero Encoding
- 3.4 Adjusting Live View Settings
- 3.5 Manual Video Quality Diagnostics
- Chapter 4 PTZ Controls
- Chapter 5 Recording and Capture Settings
- 5.1 Configuring Encoding Parameters
- 5.2 Configuring Recording and Capture Schedule
- 5.3 Configuring Motion Detection Recording and Capture
- 5.4 Configuring Alarm Triggered Recording and Capture
- 5.5 Configuring Event Recording and Capture
- 5.6 Configuring Manual Recording and Continous Capture
- 5.7 Configuring Holiday Recording and Capture
- 5.8 Configuring Redundant Recording and Capture
- 5.9 Configuring HDD Group
- 5.10 Files Protection
- 5.11 One-Key Enabling and Disabling H.264+ for Analog Cameras
- 5.12 Configuring 1080P Lite
- Chapter 6 Playback
- 6.1 Playing Back Record Files
- 6.2 Auxiliary Functions of Playback
- Chapter 7 Backup
- Chapter 8 Alarm Settings
- Chapter 9 POS Configuration
- Chapter 10 VCA Alarm
- 10.1 Face Detection
- 10.2 Vehicle Detection
- 10.3 Line Crossing Detection
- 10.4 Intrusion Detection
- 10.5 Region Entrance Detection
- 10.6 Region Exiting Detection
- 10.7 Loitering Detection
- 10.8 People Gathering Detection
- 10.9 Fast Moving Detection
- 10.10 Parking Detection
- 10.11 Unattended Baggage Detection
- 10.12 Object Removal Detection
- 10.13 Audio Exception Detection
- 10.14 Defocus Detection
- 10.15 Sudden Scene Change
- 10.16 PIR Alarm
- Chapter 11 VCA Search
- Chapter 12 Network Settings
- Chapter 13 RAID
- Chapter 14 HDD Management
- Chapter 15 Camera Settings
- Chapter 16 DVR Management and Maintenance
- Chapter 17 Others
- Chapter 18 Appendix
- 18.1 Specifications
- 18.1.1 DS-7100HGHI-E1
- 18.1.2 DS-7200HGHI-E1
- 18.1.3 DS-7200HGHI-E2
- 18.1.4 DS-7100HGHI-F1
- 18.1.5 DS-7200HGHI-F1
- 18.1.6 DS-7200HGHI-F2
- 18.1.7 DS-7100HQHI-F1/N
- 18.1.8 DS-7200HQHI-F1/N
- 18.1.9 DS-7200HQHI-F2/N
- 18.1.10 DS-7100HGHI-F1/N
- 18.1.11 DS-7200HGHI-F1/N
- 18.1.12 DS-7200HUHI-F1/N
- 18.1.13 DS-7200HUHI-F2/N
- 18.1.14 DS-7600HUHI-F/N
- 18.1.15 DS-7300HUHI-F4/N
- 18.1.16 DS-8100HUHI-F8/N
- 18.1.17 DS-9000HUHI-F8/N
- 18.1.18 DS-9000HUHI-F16/N
- 18.1.19 DS-7300HQHI-F4/N
- 18.1.20 DS-8100HQHI-F8/N
- 18.2 Glossary
- 18.3 Troubleshooting
- 18.4 Summary of Changes
- 18.5 List of Compatible Hikvision IP Cameras
- 18.6 List of Compatible Third-Party IP Cameras
- 18.1 Specifications
Digital Video Recorder User Manual
255
For -F series DVR, if you check the checkbox of Enable Password, every time when you log in to the
DVR, the Unlock Pattern interface will pop up. If you uncheck the checkbox of Enable Password,
when you log in to the DVR, the Unlock Pattern interface will not pop up.
Step 4 Click the Apply button to save the settings.
17.2 Configuring RS-232 Serial Port
The RS-232 serial port is supported by DS-7300/8100HQHI-F/N and DS-7300/8100/9000HUHI-F/N
series DVR.
Purpose
The RS-232 port can be used in two ways:
Parameters Configuration: Connect a PC to the DVR through the PC serial port. Device
parameters can be configured by using software such as HyperTerminal. The serial port
parameters must be the same as the NVR’s when connecting with the PC serial port.
Transparent Channel: Connect a serial device directly to the DVR. The serial device will be
controlled remotely by the PC through the network and the protocol of the serial device.
Step 1 Enter the RS-232 Settings interface.
Menu >Configuration> RS-232
Figure 17-4 RS-232 Settings Interface
Step 2 Configure RS-232 parameters, including baud rate, data bit, stop bit, parity, flow control
and usage.
Step 3 Click the Apply button to save the settings.
17.3 Configuring DST Settings
Step 1 Enter the General Settings interface.
Menu >Configuration>General
Step 2 Choose DST Settings tab.