User Manual
Table Of Contents
- 1.1 Product Key Features
- Chapter 1 Introduction
- Chapter 2 Getting Started
- Chapter 3 Live View
- 3.1 Introduction of Live View
- 3.2 Operations in Live View Mode
- 3.3 Channel-Zero Encoding
- 3.4 Adjusting Live View Settings
- 3.5 Manual Video Quality Diagnostics
- Chapter 4 PTZ Controls
- Chapter 5 Recording and Capture Settings
- 5.1 Configuring Encoding Parameters
- 5.2 Configuring Recording and Capture Schedule
- 5.3 Configuring Motion Detection Recording and Capture
- 5.4 Configuring Alarm Triggered Recording and Capture
- 5.5 Configuring Event Recording and Capture
- 5.6 Configuring Manual Recording and Continous Capture
- 5.7 Configuring Holiday Recording and Capture
- 5.8 Configuring Redundant Recording and Capture
- 5.9 Configuring HDD Group
- 5.10 Files Protection
- 5.11 One-Key Enabling and Disabling H.264+ for Analog Cameras
- 5.12 Configuring 1080P Lite
- Chapter 6 Playback
- 6.1 Playing Back Record Files
- 6.2 Auxiliary Functions of Playback
- Chapter 7 Backup
- Chapter 8 Alarm Settings
- Chapter 9 POS Configuration
- Chapter 10 VCA Alarm
- 10.1 Face Detection
- 10.2 Vehicle Detection
- 10.3 Line Crossing Detection
- 10.4 Intrusion Detection
- 10.5 Region Entrance Detection
- 10.6 Region Exiting Detection
- 10.7 Loitering Detection
- 10.8 People Gathering Detection
- 10.9 Fast Moving Detection
- 10.10 Parking Detection
- 10.11 Unattended Baggage Detection
- 10.12 Object Removal Detection
- 10.13 Audio Exception Detection
- 10.14 Defocus Detection
- 10.15 Sudden Scene Change
- 10.16 PIR Alarm
- Chapter 11 VCA Search
- Chapter 12 Network Settings
- Chapter 13 RAID
- Chapter 14 HDD Management
- Chapter 15 Camera Settings
- Chapter 16 DVR Management and Maintenance
- Chapter 17 Others
- Chapter 18 Appendix
- 18.1 Specifications
- 18.1.1 DS-7100HGHI-E1
- 18.1.2 DS-7200HGHI-E1
- 18.1.3 DS-7200HGHI-E2
- 18.1.4 DS-7100HGHI-F1
- 18.1.5 DS-7200HGHI-F1
- 18.1.6 DS-7200HGHI-F2
- 18.1.7 DS-7100HQHI-F1/N
- 18.1.8 DS-7200HQHI-F1/N
- 18.1.9 DS-7200HQHI-F2/N
- 18.1.10 DS-7100HGHI-F1/N
- 18.1.11 DS-7200HGHI-F1/N
- 18.1.12 DS-7200HUHI-F1/N
- 18.1.13 DS-7200HUHI-F2/N
- 18.1.14 DS-7600HUHI-F/N
- 18.1.15 DS-7300HUHI-F4/N
- 18.1.16 DS-8100HUHI-F8/N
- 18.1.17 DS-9000HUHI-F8/N
- 18.1.18 DS-9000HUHI-F16/N
- 18.1.19 DS-7300HQHI-F4/N
- 18.1.20 DS-8100HQHI-F8/N
- 18.2 Glossary
- 18.3 Troubleshooting
- 18.4 Summary of Changes
- 18.5 List of Compatible Hikvision IP Cameras
- 18.6 List of Compatible Third-Party IP Cameras
- 18.1 Specifications
Digital Video Recorder User Manual
197
Step 5 Click the Apply button to save the settings.
Step 6 After successful settings, the system asks you to reboot the device to enable the new
settings, and the PPPoE dial-up is automatically connected after reboot.
You can go to Menu > Maintenance > System Info > Network interface to view the status of
PPPoE connection.
12.2.2 Configuring Hik Cloud P2P
Purpose
Hik Cloud P2P provides the mobile phone application and as well the service platform page to
access and manage your connected DVR, which enables you to get a convenient remote access to
the surveillance system.
Step 1 Enter the Network Settings interface.
Menu > Configuration > Network
Step 2 Select the Platform Access tab to enter the Hik Cloud P2P Settings interface.
Step 3 Check the Enable checkbox to activate this feature.
Step 4 If required, select the checkbox of Custom and input the Server Address.
Step 5 To turn the Enable Stream Encryption on, you can select its checkbox.
Step 6 Enter the Verification Code of the device.
The verification code consists of 6 capital letters and is located at the bottom of the DVR. You can
also use the scanning tool of your phone to quickly get the code by scanning the QR code below.
Figure 12-3 Hik Cloud P2P Settings Interface
Step 7 Click the Apply button to save and exit the interface.
After configuration, you can access and manage the DVR by your mobile phone on which
the Hik Cloud P2P application is installed or by the website (dev.hik-connect.com).