User Manual

DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA 82
Table 1-13 Explanation of the Smart Playback Toolbar
Icon
Operation
Icon
Operation
Icon
Operation
Draw line for the
line crossing
detection
Draw quadrilateral
for the intrusion
detection
Draw rectangle for
the intrusion
detection
Set full screen for
motion detection
Clear all
/
Start/stop clipping
File management
for video clips
Stop playing
/
Pause playing
/
p
lay
Smart settings
Search matched
video files
Filter video files by
setting the target
characters
/
Show/hide VCA
information
3. Set the rules and areas for smart search of VCA event or motion event.
• Line Crossing Detection
Select , and click on the image to specify the start point and end point of the line.
• Intrusion Detection
Click , and specify four points to set a quadrilateral region for intrusion detection. Only one
region can be set.
• Motion Detection
Click and then click and draw the mouse to set the detection area manually. You can also click
to set the full screen as the detection area.
4. Click to configure the smart settings.
Figure 6-15 Smart Settings
• Skip the Non-Related Video: The non-related video will not be played if this function is enabled.
• Play Non-Related Video at: Set the speed to play the non-related video. Maximum 8/4/2/1 are
selectable.
• Play Related Video at: Set the speed to play the related video. Maximum 8/4/2/1 are selectable.