User Manual

DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA 76
The indicates the start time and end time of the record files.
represents normal recording (manual or schedule); represents event recording (motion, alarm,
motion | alarm, motion & alarm).
Playback progress bar: use the mouse to click any point on the progress bar to locate special frames.
6.1.3 Playing Back by Event Search
Purpose
P
lay back record files on one or several channels searched out by restricting event type (motion detection,
alarm input or VCA). Channel switch is supported.
1. Go to Menu > Playback.
2. Click and select to enter the Event Playback interface.
3. Select Alarm Input, Motion, VCA as the event type, and specify the start time and end time for search.
Figure 6-6 Video Search by Motion Detection
4. Click Search, and the record files matching the search conditions will be displayed on a list.
5. Select and click to play back the record files.
• Click Back to return to the search interface.
• If there is only one channel triggered, clicking takes you to Full-screen Playback interface of
this channel.
• If several channels are triggered, clicking takes you to the Synchronous Playback interface.
Check the checkbox to select one channel for playback or select multiple channels for
synchronous playback.