User Manual

DS-720xHTI-Kx DVR User Manual
UM DS-720xHTI-Kx 012918NA 69
4. Click to enter the editing interface.
5. Assign the HDD group.
1) Use the radio selection button to choose a group number for the HDD group.
2) Click Apply to save your settings.
3) Click OK to return to the upper level menu.
6. Repeat the above steps to configure more HDD groups.
7. Choose the Channels for which you want to save the record files in the HDD group.
1) Go to Menu > System Configuration > HDD > Storage Mode.
Figure 5-26 HDD Storage Mode
2) Choose Group number in the Record on HDD Group drop-down list.
3) Check the channels you want to save in this group.
4) Click Apply to save settings.
After configuring the HDD groups, configure the recording settings following the procedure in Chapter
5.2-5.7
.
5.10 Files Protection
Purpose
You can lock the recorded files or set the HDD property to Read-only to protect the record files from being
overwritten.
Protect File by Locking the Record Files
1. Go to Menu > File Management > Record.